Tuesday, March 26, 2024

How To Put Lights In A Wine Bottle Without Drilling

Don't Miss

How To Make Decorative Wine Bottle Lights Without Drilling

How to make a Wine bottle Night Lamp without Drilling

Drilling a glass bottle is a menacing task I tell youbut are one of the gorgeous home décors that you can own in lesser than 10 bucks. If you are planning to make , then I just might have the right ideas readied for you.

Crafts made from recyclable materials are always exclusively aesthetic. If you have empty wine bottles around your home, you can easily refurbish them into beautiful home décor lights

Today, Ill show you some amazing ideas on how to make decorative lighted wine bottles without any drilling and cutting involved. This saves your preparation and cleaning phase big-time and also saves the possibility of wounding yourself while cutting the glass.

So, here you go, we have rounded off 19wine bottle lights that would surely add a festive style to your home.

19 Decorated Wine Bottle Lights Without Drilling

1) Recycled Bottle Torch

With the help of copper top plate connector, wood screws, copper cap, fuel and wick, and of course empty wine bottles you can easily create beautiful outdoor recycled wine bottle torches just like that.

2) Wine Bottle Chandelier

If you have a dozen empty wine bottles, refurbish them into artistic chandeliers to illuminate the interiors of your home or work. The basic items you would need for this décor are chains and big ring to hold the bottles and fairy or rice lights. Party at home? try our 41 Creative Ways to Serve Finger Foods at Parties

3) Peacock Decorated Wine Bottle With Lights inside
4) Simple Wine Lighted Bottle

How To Open A Bottle Of Wine With A Tree

This method of uncorking uses the same technique as the shoe trick. Surprisingly, its more effective. Heres how it goes:

  • Wrap the bottle in a towel.
  • Find a big and sturdy tree.
  • Bang the bottle at the tree, holding the bottle wrapped in a towel with your both hands. Be careful not to break the bottle.
  • Keep banging as the cork starts moving.
  • Get enough of the cork out so you can pull it out with your hands.
  • Why is this better than the shoe and wall method?

    • If youre outside on a picnic, its easier to find a sturdy tree than a wall.
    • Tree bark softens the blow and you dont need to find a shoe that would fit for this.
    • Not having to balance the shoe and the bottle at the same time makes hitting accurately easier.

    So, just keep on banging until it pops.

    Precautions You Need To Take

    You need to remember that youre puncturing glass. Therefore, the piece thats punctured has to go somewhere. If youre doing this inside of a bottle, there isnt much to worry about. Fill it with water and flush the glass into the garbage.

    If youre using flat glass, you might want to use a cloth under it. You can then take the fabric and dump the remnants. Also, its not a bad idea to wear some protective eye gear just in case.

    You May Like: Ship Alcohol To Massachusetts

    How Do I Drill A Hole In A Glass Door

    To prevent glass damage, you must drill a starter hole at the marked point.

  • Place the point of the drill at the center of the marked point on the glass.
  • Pour a few drops of lubricating oil on the area around the drill tip and glass.
  • Beginning at low speed with medium pressure, drill a small starter hole into the glass.
  • Open A Wine Bottle With A Shoe

    Wine bottle light. 1. Drill hole in back of bottle 2. Put ...

    One of the most popular tricks to uncork a bottle is using a shoe. Sounds fancy, indeed! But does it actually work? The method is as follows.

  • Place the bottle in a shoe at the heel.
  • Bang the shoe at the wall with the bottle.
  • The force of the hitting should eventually move the cork out enough so you can pull it out with your hands or pliers.
  • Sounds easy enough but there are a few caveats:

    • You need a sturdy enough wall to bare all the hitting with a shoe. This probably wont work in a hotel where youll most likely get complaints from your neighbors or damage the wall. This most likely will work only outside or in a garage where brick or concrete walls are available .
    • Youll need to keep hitting accurately and long enough. This is a long and tedious process. The force of a hit has to go at a 90-degree angle to through the heel and the bottle. The more accurate the hits, the more likely you are to succeed. Not every shoe will work for this.
    • Youll have to finish off the uncorking with some tool anyway you dont have forever to keep banging on.

    So while this trick sounds cool in theory, in practice its a desperation move you can turn to if all else fails.

    Recommended Reading: Number Of Carbohydrates In Wine

    How To Recork A Wine Bottle

    This is a method to recork and reseal a wine bottle if you have to do it. It goes as far as showing you how to put the foil covers on the bottles.

    Inserting the cork itself is the easy part as it requires to simply force it in. Then, refer to the video to see how to close the foil cover for the complete process.

    The bottle turns out as new .

    How To Make A Wine Bottle Night Lamp Without Drilling

    • Glass Drill Bit Set : https://amzn.to/2yTvIu1Blue Putty: https://amzn.to/34r7XoSHow to Drill a Hole in a Glass Bottlein 25 Seconds, a great tech..
    • How do you put fairy lights in a bottle? Slide your fairy lights through the hole and pull them up, out the top of the bottle, until you’re stopped by the battery pack.Secure the wire, at the halfway point, to the bottom of the cap or cork using hot glue or tape
    • Have you ever wondered how to drill glass bottles for crafts?With the proper tools it is very easy. I used a Rigid 1/2 diamond tip glass bit from HomeDepot..
    • Easy way to drill holes in wine bottles and glass jars for cool DIY projects
    • Insert the lights into the bottle. Remove the decoration lights from the box, and pull the lights taut so they can lay straight. Check to make sure the string of lights work by plugging them into an outlet. If the lights light up and are working correctly, insert the first bulb on the string in through the hole that you drilled out
    • I saw a video using a drill press and wax ring to drill a hole in wine bottles. Awesome!!!! The drilling process was FAST! The drill bit I purchased from Home Depot is a Ridgid 1/2 inch diamond drill bit

    Don’t Miss: Gluten Free Wine List

    What Customers Have To Say

    An Amazon customer said that these wine bottle lights are fantastic, and using them is a great way to decorate and light up any small area. She also likes the automatic shut-off feature that it comes with. The lights were running for 6 hours and came back on by themselves at the same time the following day.

    Another buyer said that these were exactly what she wanted for wine bottle lights. She particularly likes that only by a push of a button, the cork can already work at various flashing speeds.

    How To Open Wine Bottle With A Torch

    How to create a wine bottle with lights and no drilling!

    More ways to use heat to your favor in opening that bottle. A cooking blow torch comes to your aid. The idea is the same as using a lighter:

  • Heat the neck of the bottle at the cork level .
  • Keep turning the bottle and heating it evenly from all sides.
  • It pops out due to expanding air in a few minutes.
  • This is a better and safer method than the lighter, but you need to have a cooking torch available.

    Recommended Reading: Where To Sell Vintage Wine

    How To Open A Wine Bottle With A Knife

    A knife is a handier tool than you ever knew. And yes, you can get that cork out with its help. Heres how:

  • Insert a knife at an angle into the cork, flat side to the corks surface.
  • Turn the cork with the knife by pushing it up.
  • This method does require the use of force and its fairly dangerous as you are using a sharp knife . Its not easy, but a manly trick to pull off. I would rate it higher than the shoe or the key method, simply for the coolness factor. There are easier methods, though.

    Drill A Hole In A Glass Bottle

    Sometimes you have a bottle that just doesn’t have enough holes in it. That one at the top comes in handy and has it’s purpose, but sometimes you just need a hole on the side of your bottle. In this instructable I’m going to give some tips for drilling some of those extra holes into glass bottles.

    I also made a video of the process, which you can watch here:

    Don’t Miss: Kim Crawford Sauvignon Blanc Carbs

    Amazing Wine Bottle Christmas Crafts And Decor Ideas

    If were fortunate enough to do some serious celebrating this holiday season, well find ourselves with a lot of empty wine bottles. This provides a great opportunity to do some easy holiday decorating.

    In this article, youll find thirty ideas for decorating wine bottles for the holidays. If you dont have any wine bottles, just pick up some bottles from your local dollar store. Your secret is safe here.

    • Save

    If you want to add strings of LED lights to your bottles, youll find more than one way to drill a hole in this collection including a way to get around cutting glass altogether.

    How To Make Christmas Bottle Lights

    How to Make Decorative Wine Bottle Lights Without Drilling ...

    1.. Firstly, soak the bottles in hot water soapy to remove all labels and residue from the outside. Then leave to dry thoroughly.

    2. Next, stick the foam Christmas shapes onto the bottles where you would like the light to shine through.

    3. Then, spray paint the bottles, with 2 coats of paint. Letting each coat dry in between. Once the paint has dried, carefully remove the foam stickers.

    4. Now the bottles are ready for the cork lights. To make my lights look more festive I covered the cork in Christmas washi tape.

    I told you they were simple to make. If you want to make more fancy Christmas scenes. You can either cut your own foam shape design or use a die cutting machine.

    I used my die cutting machine to cut some intricate birch trees and used this to create a lovely winter scene on an old bourbon bottle.

    I think that these lights would make a lovely Christmas gift, you can use bottles of different shapes and spray paint them in different colors. A Christmas bottle light made from an old Whisky bottle would look great in a man cave.

    They also make lovely night lights at Christmas, my son wants one for his room.

    Since making these lights I have made a Halloween version of the bottle lights and some Valentines bottle lights.

    If you like to make Christmas crafts with lights then you will probably like the LED Deer Head I made last year. Or this DIY Christmas garland with lights.

    Youll find many more cool Christmas DIYs for adults here.

    Monday 27th of November 2017

    Recommended Reading: What Wines Have The Least Sugar

    Want To Use Those Empties To Make A Beautiful Lamp Rather Than Just Throw Them Away There Are Some Really Decorative Bottles Around These Days Particularly Gin Bottles That Are Ideal So No Matter What Your Tipple You Can Be Creative Just Take A Look At What You Can Do With Your Empties

    Our expandable bungs can fit various size bottles, with a choice of 8 sizes and three finishes. Our lamp bungs have a screw slot so, as you turn the screw, it expands a couple of millimetres to get a nice snug fit for your bottle neck. Choose your lamp holder, some earthed lamp flex, and an inline switch and you are well on your way to creating your own unique lamp. You can also visit our Bottle Lamp Kit making page where you will be led through the products you may need if you are not so sure whats needed or indeed possible!

    Expandable bottle bungs

    Small bottle bungs

    Our three smaller sized bungs have a small decorative cap perfect for making a lamp from a classic wine or champagne bottle, just add one of our side-entry lampholders for your flex access if you dont want to drill a hole in the bottle.

    Or try one of our larger bungs if you are making a table lamp from a Vase, Demijohn, Milk churn, Trumpet weve seen them all!

    Large bottle bungs

    Lamps and Lights customer, Andy from Andy Dane sent us a lovely photo of his project thank you for sharing it with us Andy!!!

    Often Asked: How To Put Christmas Lights In A Wine Bottle

    Push the bottom of the spindle through a 1 washer, the drilled cork, and another washer. Secure with a nut. Drill a hole in the base of the bottle. Push the sripped end of the electric cord through the hole and up through the neck of the bottle, then through bottom of the spindle and out the top. Connect the wires to the screws on the socket Fill the bottles up with water to the very brim of the bottle. After watering your plant, quickly turn the bottle upside down and shove into the dirt about 6-8 inches from the base of the plant. As the soil dries out, it will gradually drain the water from the wine bottle Glass bottles, such as used wine or beer bottles, can be used for a variety of DIY crafts and home goods. Cutting glass bottles, though, brings with it a whole host of complications. If you are cutting glass bottles, a wet tile saw is the best device you can use, especially when compared to other power tools These bottle lights make the perfect party lights. All you have to do is drill a hole in the back of several empty bottles and then run a string of lights through them. 2

    Also Check: Belle Meade Bourbon Tour

    How To Make Wine Bottle Accent Lights

    wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time.wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 87% of readers who voted found the article helpful, earning it our reader-approved status. This article has been viewed 519,555 times.Learn more…

    Everyone has seen white christmas lights adorning walls, adding a delicate touch of accent lighting to any area, but did you know you can make accent lights using empty wine bottles? Making your own wine bottle accent lights is a creative, customizable, and eco-friendly way to cast a gentle glow to any room of your house.

    How Do You Make A Spoon Lamp

    Drilling Wine Bottles for Lights

    Cut the bottom of the bottle and the handles of each plastic spoon. Then start gluing the spoons on the bottle, as shown in the pictures. When you get to the top, create a collar out of spoons. Attach the cable to the light bulb and insert in inside the bottle, then cover the wire using the spoon-collar.

    You May Like: Cabernet Sauvignon Grapes For Sale

    How To Open A Wine Bottle With A Fork

    Not an easy method , but it is a way to do it if you have nothing else on you. Use a fork and a screw:

  • Screw in the screw into the cork.
  • Use a fork to pull it out.
  • Its not easy, because unlike a hammer, the fork doesnt provide a good grip. So wrap it in a towel for a better grip and give it all youve got!

    Tapered File With Kerosene

    Unlike the first method, this one is less involved, and its excellent for any glass. However, it may take a bit longer. For this method, you will need:

    • A three-cornered tape file
    • Kerosene, or turpentine

    First, you will want to put a drop of lubricant on the tip of the file. Then, you will place the tip against the part of the glass you want to puncture and slowly turn it.

    This will take quite a while, but it works! If you feel your files tip is too dry, you can always add some more lubricant. Try to create a little divot so the tip will stay in place as you turn the file.

    Recommended Reading: Wine Yeast Where To Buy

    How Do You Turn A Vase Into A Lamp Without Drilling

  • The first thing to do it to put your lamp kit together, if it doesnt come pre assembled.
  • Add your vase cap at the bottom of the lamp section and attach it with a screw underneath.
  • Take your super glue and put some along the rim of your vase.
  • Then, place your vase cap and lamp kit on top and let it dry.
  • How To Open A Wine Bottle With A Flip Flop

    Wine bottle decoration. Drink wine, drill hole in bottom ...

    This one is for the show rather than being practical. So youre on the beach and you have a bottle of fine wine you want to enjoy. Alas, you left the corkscrew home. What do you do if the only thing remotely close to a tool is your flip flops?

    • Find the nearest palm tree.
    • Put the base of the bottle into a flip flop.
    • Bang the bottle with the flip flop at the tree until the cork moves out.

    The flip flop is really necessary only if the tree bark is too hard. Otherwise, youll get the same result if you just bang the bottle at a tree. Whether you succeed depends on how well the bottle is sealed and how moist the cork is.

    You May Like: Austin Hope Trouble Maker

    More articles

    Popular Articles